Vibration Sander machine
It is ideal for scrubbing to remove burrs deburring, pre-plating and polishing to remove protrusion after plating.
It reduces the defect rate of printed circuit board production.
MVS-602B3
- Uses a vibration type to achieve fuzzy, uniform polishing.
Features
- Polishes a wide range of surfaces.
- High cutting performance ability for protrusions that are difficult to remove even with buffing.
- Quick and Easy, one-touch installation of abrasive tools replacement.
- Orbital (Orbit = circular rotation), non-directional polishing be done.
Specification
| Abrasive material sheet | Maximum available width 650mm |
|---|---|
| Machine unit dimensions | 1540(W) × 1435(D) × 1450(H) mm |
| Machine Gross weight | 1,750kg |
| Electric power requirements | 3 phases 200V 3.5kw |
| Transport conveyer speed | 1.0 – 4.0m/min |
| Spindle revolution | Diameter 5mm 500 – 1800rpm |
| Oscillation cycles | Oscillation stroke 20mm 27cpm |
| Buff roll pressure control (Auto adjustment pressure control) |
Adjustment for load pressure by load cell electric cell. |
| Available work thickness | 0.06mm – 3.2mm |
| Scrubbing sheet exchange method | One-touch attachment on and removal of polishing tools as PAD by air cylinder lock system Fixing abrasives with Velcro tape |
*Specifications are subject to change without notice for improvement.
